The Renegade uses Channel trucks, which work a little differently from our SuperCarve trucks. Each truck has two “springs” with bushings seated inside.

Here’s how you can replace them:

🛠️ Step-by-step:

1. Locate the screws

   • Underneath each truck, you’ll see screws that sit directly below the spring and bushing sets.

2. Loosen the screw

   • Loosen the screw on the side of the truck where you want to replace the bushing.

3. Relieve the tension

   • Place your foot on the opposite side of the deck, pushing it down.

   • Lift the other side of the deck — this removes tension from the spring you’re working on.

4. Remove the spring and bushing

   • With the tension relieved, carefully lift out the spring and the bushing underneath.

5. Replace with your new bushing

   • Drop the new bushing into place, reseat the spring, and line it all back up.

6. Re-tighten the screw

   • Reverse the process and secure the screw back into place.